Overview-Electromagnetic Flowmeter

electromagnetic flowmeters generally have the following features. Unaffected by the temperature, pressure, density, or viscosity of the liquid.Able to detect liquids that include contaminants (solids, air bubbles). There are no pressure loss.No moving parts (improves reliability).Cannot detect gases and liquids without electrical conductivity. A short section of straight pipe is required.

Electromagnetic flowmeter Principle

Electromagnetic flow meters detect flow by using Faraday’s Law of induction.
Inside an electromagnetic flow meter, there is an electromagnetic coil that generates a magnetic field, and electrodes that capture electromotive force(voltage). Due to this, although it may appear as if there is nothing inside the flow pipe of an electromagnetic flow meter, flow can be measured.

FEATURES

PRODUCT BENEFITS

Mass & Volumetric flow monitoring of most conductive liquids

  • The foremost advantage is fixed parts
  • Withstands changes in density, viscosity, temperature, and electrical conductivity
  • Not affected by contamination of the liquid
  • Easy to maintain with a low maintenance cost
  • Capable of operating in both directions

Easy to Install, lots of field installation options

Rugged, long-lasting design for the toughest applications

SPECIFICATIONS

Pipe diameter:1/4″inch to 80″inch

Accuracy:0.5%,1.0%

 Repeatability:0.16%,0.33%

Pressure rate:≤6 Bar,≤10 Bar,≤16 Bar,≤25 Bar,≤40 Bar

Temperature:≤60℃(Rubber lining),≤130℃(Teflon lining)

Velocity:0.1-15m/s

Ambient temperature:
Operating: -20° to 60°C
Storage: -40° to 65°C

ELECTRIC

Power supply:90-250VAC,24VDC 500mA,3.6V Battery

Output signal:

  • 4-20mA
  • Pulse
  • User-definable pulse output for totalized flow

Digital communications: RS485, Hart

Hazardous-Area Location Enclosure

CONNECTION TYPE

Remote type

Electromagnetic-Flowmeter

Intergate type

SS304 Body

Insertion type

Tri-clamp type

Drawings

  • inline Electromagnetic Flowmeter 1“ inch drawing
  • inline Electromagnetic Flowmeter 1.5“ inch drawing
  • inline Electromagnetic Flowmeter 2“ inch drawing
  • inline Electromagnetic Flowmeter 2.5“ inch drawing
  • inline Electromagnetic Flowmeter 3“ inch drawing
  • inline Electromagnetic Flowmeter 4“ inch drawing
  • inline Electromagnetic Flowmeter 5“ inch drawing
  • inline Electromagnetic Flowmeter 6“ inch drawing
  • inline Electromagnetic Flowmeter 8“ inch drawing

Program

  • RS485 Protocol
  • Hart Protocol

Related Products

flange type votrex flow meter

Vortex meter

Turbine meter

Ultrasonic flowmeter

Thermal mass flowmeter

Orifice plate